Mechanical End Plates

All Twinfix glazing systems are supplied with polycarbonate end plates, push fit for the P227, P261, and P501 systems and screw fit for the P280, P286, P288, P320 and P600 systems.

As well as polycarbonate, many of the Twinfix systems are also suitable for glazing with glass. Being so much heavier than polycarbonate, it is recommended that a mechanically fixed end plate be used at the end of each glazing bar/rafter to stop the glazing material from slipping.

RG-MEP For Rafter Glazing Bars

Colour:Mill Finish, White or Brown

SB-MEP For Structural Glazing Bars

Colour:Mill Finish, White or Brown


Ref.Cap ProfileBase ProfileGlazing ThicknessEnd Plate for Glass
P261226261Up to 25mmRG-MEP
P320320261Up to 25mmRG-MEP
P500500501Up to 25mmRG-MEP
P227226227Up to 25mmSB-MEP70
P2802802838mm to 25mmSB-MEP95
P284280283 + 2846mm to 25mmSB-MEP95
P286320286Up to 25mmSB-MEP70
P288GC280 + Gasket Carrier2886mm to 20mmMade to Order

Colour Options

Mill finish as well as polyester powder coated white (RAL9910 satin) and brown (RAL8040 satin) are available as standard. We can also supply the aluminium painted to a specific RAL colour although this may be subject to a minimum quantity requirement and surcharge.

Mill FinishRAL 9910
White (satin)
RAL 8040
Brown (satin)
Please note: The colours shown are not 100% accurate and are for guidance only


  • Stop end plate for glass

Complementary Fixing Accessories

Side TrimU Profile
Ref 272 - 10mm
Ref 273 - 16mm
Ref 275 - 25mm
Side TrimRef 252 - 10mm
Ref 253 - 16mm
Ref 255 - 25mm
U Profile
Fixing Buttons (white)Fixing Buttons (brown)
Ref 272 - 10mm
Ref 273 - 16mm
Ref 275 - 25mm
Ref 252 - 10mm
Ref 253 - 16mm
Ref 255 - 25mm
Anti-dust/Breather TapeButyl Flashing
Ref FT or PBT 10
Ref FT or PBT 16
Ref FT or PBT 25
Anti-dust/Breather Tape200/20 White
200/20 Lead
Butyl Flashing

Help & Advice

If you have a project in mind or would like help or advice on any of our products or services, please either ring us on 01925 811311, email us at or get in touch via the enquiry form on our Contact Us page.