P700 Snap-fit Glazing Bar

At 45mm wide, the P700 is a snap fit glazing system for lean-to roofs where rafters make up the structure of the roof.

Standard Glazing Bar

Colour:White or Brown
Length:2.5m, 3m, 3.5m, 4m and 6m

The P700 Snap-fit glazing bar consists of a 45mm wide aluminium base bar which is screw fitted to the rafter, gaskets are inserted into the base bar and a PVCu cap snap fits into the base bar to accommodate 10mm, 16mm and 25mm multiwall polycarbonate sheet. The co-extruded finish on either side of the cap ensures a watertight system whilst allowing for the thermal expansion within the multiwall polycarbonate glazing.

At the eaves end of each bar a two part PVCu end plate is fitted, the bracket fits into the base bar and is screw fitted through the base bar into the rafter and a cover plate slips over the bracket.

The P700 Snap-fit glazing bar is supplied pre-packed in 2.5, 3.0, 3.5, 4.0 and 6.0 metre lengths in white and brown colours.

Twinfix can also supply the accessory products needed to compliment your roof including F-profiles, Side Trims, U-profile End Closures, Eaves Fillers and fixings.

Hip Glazing Bar

The P700 cannot be used as for roof applications where a hip or valley is required, it is for lean-to type roofs only.

Colour Options

The P700 Snap-fit glazing bar is available with a white or brown PVCu snap-fit cap with a mill finish aluminium base bar.

Please note: The colours shown are not 100% accurate and are for guidance only


  • Rafter Assembly Roofing
  • Conservatories
  • Canopies
  • Car Ports
  • Lean-to Conservatories
  • Porches

Glazing with Glass

The P700 system is not suitable for use with glass.

Complementary Fixing Accessories

Side TrimU Profile
Ref 272 - 10mm
Ref 273 - 16mm
Ref 275 - 25mm
Side TrimRef 252 - 10mm
Ref 253 - 16mm
Ref 255 - 25mm
U Profile
Eaves FillerFixing Buttons (white)Fixing Buttons (brown)
Ref 226F226 Eaves FillerRef 272 - 10mm
Ref 273 - 16mm
Ref 275 - 25mm
Ref 252 - 10mm
Ref 253 - 16mm
Ref 255 - 25mm
Anti-dust/Breather TapeButyl Flashing
Ref FT or PBT 10
Ref FT or PBT 16
Ref FT or PBT 25
Anti-dust/Breather Tape200/20 White
200/20 Lead
Butyl Flashing

Help & Advice

If you have a project in mind or would like help or advice on any of our products or services, please either ring us on 01925 811311, email us at enquiries@twinfix.co.uk or get in touch via the enquiry form on our Contact Us page.


Related FAQs

1. Can I use your glazing bars to install glass?
You can use all of our bars to install glass, with the exception of the P600 and P700 Snap-fit systems. However, please note that you will need to use a Mechanical End Plate to ensure the glass is held securely in place; the plastic end plates that are supplied with the bars are only suitable for use with multiwall polycarbonate.